Understanding aspect
What aspect means, how it is measured clockwise from north, how flat cells are handled, and why aspect matters for sun, snow and vegetation.
You will learn
- What aspect measures and in which units.
- How Orbis3D computes it from the same 3 × 3 window as slope.
- How the eight direction classes are defined.
Prerequisites
The idea
Aspect is the compass direction a slope faces: the direction in which water would flow straight downhill. It is measured in degrees clockwise from north:
| Aspect | Faces |
|---|---|
| 0° (or 360°) | North |
| 90° | East |
| 180° | South |
| 270° | West |
Aspect matters wherever direction matters. In the northern hemisphere, south-facing slopes receive more sun, are warmer and drier, and lose snow earlier; north-facing slopes keep snow and support different vegetation.
How Orbis3D computes it
Aspect uses the same east and north rates of rise as slope (see Understanding slope):
downslope direction = −(dz/dx, dz/dy)
aspect = atan2(−dz/dx, −dz/dy), in degrees clockwise from north
The rates use true ground distances, so aspect is also correct for geographic DEMs whose cells are narrower east–west than north–south.
Flat cells have no slope and therefore no direction. Orbis3D marks them as Flat, shows them in grey and leaves them out of the aspect statistics.
The eight classes
Orbis3D can group aspect into eight 45° classes centred on the compass directions:
| Class | Aspect range |
|---|---|
| N | 337.5° to 22.5° |
| NE | 22.5° to 67.5° |
| E | 67.5° to 112.5° |
| SE | 112.5° to 157.5° |
| S | 157.5° to 202.5° |
| SW | 202.5° to 247.5° |
| W | 247.5° to 292.5° |
| NW | 292.5° to 337.5° |
Things to keep in mind
- Aspect is circular: 359° and 1° are nearly the same direction. The average of aspect values in degrees is meaningless; use the class distribution instead.
- On gentle slopes, aspect is sensitive to tiny elevation errors. Consider the slope as well before interpreting aspect on almost flat ground.
Next
Map the aspect of real mountains in Performing aspect analysis.